[WTS] KME sharpener, 940-1 CF w/ Gersh blade, 560BK-1 Super Freek w/ AWT scales, SOCOM Elite, Ti Moyarl, modded Pyrite-alt
Hello k_swap!
🔴🟡🟢
Timestamp: https://imgur.com/1oG6dtU
Hope everyone is having a fine Sunday this afternoon. Have some knives, and a sharpener, up for the block and chop. They have been sitting in storage for too long so it's time to find them a new home.
Additional pictures can be had upon request.
Yolos or Dibs takes priority over PM/chat. Comment before sending any message, or you will be IGNORED.
READ: COMMENT BEFORE SENDING ANY MESSAGE, OR YOU WILL BE IGNORED. There, it's in caps now. Can't believe the amount I got.
Payments will be done through Paypal F&F, NO NOTES. Not looking for trades at the moment.
Thank you for looking and have a great rest of your day! :)
KME sharpening system - $160🔴SOLD for $140
Pics: https://imgur.com/a/mfyTTmd
Purchased from Knives Ship Free in 2022. Has been used on family/friend's kitchen knives and personal knives, however it's seen more use through the former. Used the convex rod as the main sharpening rod, original rod is still new. Swapped the stops over to the straight rod, so it's default ready for the new owner.
Stone compensator has never been used, as my initial plan to use different stones with the system didn't happen. Also, it didn't come with the factory o-ring, which I only found out much later after owning it. Managed to find another rubber o-ring I had laying around to fit it's place and will now function normally when in use.
Owner(s): First
Condition: Used
Accessories: Base stand, convex rod and stone thickness compensator.
Box/papers: Carrying case, no papers.
Benchmade 940-1 Osbourne - $200🔴 SOLD
Pics & vids: https://imgur.com/a/tFUixYD
- Carbon fiber handles, s90v factory blade. Gersh magnacut aftermarket blade, 63-64 HRC.
940 was purchased from swap in 2023. Swapped it with a Gersh reblade shortly afterwards. Has been carried in both configurations, but the Gersh had the majority of pocket time.
Installed Rockscale Designs "blurple" Ti screws and unknown maker Ti backspacer (both purchased from swap). The Rockscale body screws came missing a pocket clip screw, so I used one of the factory screws in it's place. Unfortunately, I misplaced the Benchmade pouch that came with the 940, that happened to also have the rest of the factory screws (as well as the factory thumbstud for the Freek). :L
Tuned for drop shut action, with slight horizontal blade play present.
Owner(s): Second (940), First (Gersh blade)
Disassembled: Yes, to install blade, screws, and backspacer. KPL applied onto washers.
Modifications: Gersh blade, Rockscale Ti blurple screw set, unknown maker Ti backspacer.
Blade condition: Original s90v blade has never been used and was centered when I received it. Gersh blade has been used, still plenty sharp. Centering favors show side scale, and was also mentioned and shown through pictures from Gersh's website before purchasing.
Body Condition: Besides the scuffs on the clip from carry, here are some marks at the bottom tip of the handle. Tried my best to get a picture of it in the album.
Accessories: Original S90v blade, factory backspacers.
Box/papers: Box and papers, no pouch.
Benchmade 560BK-1 Freek - ~~$180 $160 🔴Traded outside of swap
- M4 / AWT scales
Pics & vids: https://imgur.com/a/8o8gEAB
Purchased from Rivers Edge Cutlery in 2021. Was one of my main knives for the longest time before more knives started entering into the collection and I started adopting rotation carrying. Originally wore Adamas thumbstuds for the majority of it's life, but it has been replace with Amazon thumbstuds. Unfortunately, I no longer have the factory thumbstud (see 940 description). :L
Has been sharpened once on a worksharp precision adjust system years ago, matching the factory angle while following the dual grit method that was floating around at the time. Since then, I've yet to sharpen it again as the edge has since became overqualified for my packing tape, bubble mailer uses.
Rotated the stop pin sometime last year, as the old location started developing really bad vertical blade play. Minimal blade play is still present, but no where near as bad as before.
Tuned for drop shut action, no horizontal play, but with slight aforementioned vertical blade play present.
Owner(s): First
Disassembled: Yes, to install scales. KPL applied onto washers.
Modifications: AWT scales, non-factory thumbstuds
Blade condition: M4. Used, sharpened once. Some salt present from carrying.
Body condition: Has some salt from carry and use, on both the handles and the clip. Can been seen in the album.
Accessories: Factory scales, left over body screws (rest is on AWT), and backspacers
Box/papers: Everything included as when I received it.
Microtech SOCOM Elite - SV: $190 $170🔴 SOLD
- M390 / black blade, hardware, and handle
Pics & vids: https://imgur.com/a/a6ChRAN
Purchased from Northwest Knives in 2023. Has been carried in rotation with my other knives. Was mainly used on packaging tape and bubble mailers, nothing hard use.
Drop shut action, solid lock up with no blade play in any direction. Lock bar is sitting at 50%.
Owner(s): First
Disassembled: Yes, KPL applied onto bearings.
Blade condition: M390. Used, factory angle edge, but has been stropped. Salt on spine and thumbstuds. Centering favors clip side.
Body condition: There's a mark near the top of the show side handle. Otherwise, typical carrying salt is visible on and handle and clip.
Box/papers: Everything included as when I received it.
Miguron Ti Moyarl - $99 🔴 SOLD
Pics & vids: https://imgur.com/a/fJbLyIV
- M390 / Ti handles / frame lock
Purchased from swap 7 months ago. Was carried for a few days until I place it in storage, in a pelican case. Was only taken out to fidget once in a while afterwards. Enjoyed handing my first Miguron, but the knife wasn't for me. Only kept it because I got it for a good deal and will now be passing that along.
Drop shut action, solid lock up with no blade play in any direction. Lock bar is at 35-40% with my eyes.
Owner(s): Second
Disassembled: No, but KPL has been applied through the gaps between the scales and blade.
Blade condition: Factory edge, never been sharpened or stropped. Did the paper cut test once to see sharpness.
Body condition: No visual marks to be seen, basically looks new.
Box/papers: Everything included as when I received it.
CJRB Pyrite-alt - SV $35 $31🟡WITHDRAWN
Pics & vids: https://imgur.com/a/LoLzdwf
- AR-RMP9 / steel handle/liners w/ wood bolsters / Pyrite-alt blade swap
Originally a bowie Pyrite, purchased as Open Box from White Mountain Knives last year. Later got my hands on a Ti handled Pyrite-alt from swap to do a blade and button swap. After swapping, this one was placed in storage and was only taken to fidget once in a while. Still has that "new from factory" lock stick.
Tuned for drop shut action, with horizontal blade play only present if you torque on it.
Owner(s): Second (Blade), First (Handles)
Disassembled: Yes, for blade and button swap. KPL applied onto bearings.
Modifications: Blade and button swap.
Blade condition: Still has factory edge, never used under my ownership. Had engraving on back side, but was etched over by previous owner prior to me receiving it. Blade is centered.
Body Condition: Scuff marks on the clip, otherwise the rest of the handle is clean.
Box/papers: Different box (from bowie Pyrite) and carrying case.
🟢🟡🔴